join our community today

princejim · 20th July 2018

ATC engaging but lamp does not light? Does anyone have any idea how to fix this, is it just a new LED?

Just had a email from ALKO, its likely to be the LED, you can buy from our shop.

£61.95 incl. 20% VAT, free of shipping costs

shipped within 3 ***8211; 5 working days!

Jim.

DaveA · 20th July 2018

https://www.ebay.co.uk/sch/i.html?_f...rs=spell_check
Try E-bay you didn't say your van make. It's usually the LED that blows.

K9Brian · 20th July 2018

Some info that may help :http://www. al-ko. co. uk/edit/files/handbooks/atc-handbook. pdf

princejim · 21st July 2018

DaveA thanks very much for the info but already found them on Ebay ordered yesterday. Will let you know how I get on, some people say it is water getting into the socket that is the trouble so will give the socket a good clean.

But I can,t believe the cost if it was a car component it would be a £10.

Thanks for all the replies.

portchester1 · 23rd July 2018

From another forum a "segapod" very helpfully offers us a much cheaper DIY work around using bi colour LEDs from this link.

https://www.ebay.co.uk/itm/122957064999

Claiming "It's a very simple job for anyone with basic soldering skills so don't be discouraged."

princejim · 24th July 2018

Thanks, Port, will send for a led see how easy it is to fix the old unit for future ref.

princejim · 4th August 2018

Ok sent for the leds and simple workround if anyone would like to test it PM me, must be a bailey.

I have one working on my van so should be ok, but unable to test this one as not able to get on the van.

portchester1 · 5th August 2018

Jim, did you find a resistor or two were already in the old lead, or any needed adding?

Is it simply switch the old LED out for the new one?

rslsys · 8th August 2018

Had mine replaced under warranty at 3rd service.

Cheers
Keith

princejim · 3rd October 2018

Quote:

Originally Posted by portchester1

Jim, did you find a resistor or two were already in the old lead, or any needed adding?

Is it simply switch the old LED out for the new one?

Yes simply replace the single led, sorry about the delay.

If anyone needs the faulty one replacing get in touch.

20th July 2018	#1
princejim Camping Addict Join Date: Oct 2008 Location: Potteries Age: 73 Posts: 120 Thanks (For This Post): 0 Thanks (Total): 2 Rep Power: 13 My Mood	AL-ATC light not working. ATC engaging but lamp does not light? Does anyone have any idea how to fix this, is it just a new LED? Just had a email from ALKO, its likely to be the LED, you can buy from our shop. £61.95 incl. 20% VAT, free of shipping costs shipped within 3 ***8211; 5 working days! Jim. __________________ If he is indeed wise he does not bid you enter the house of his wisdom, but rather leads you to the threshold of your own mind. Kahlil Gibran

21st July 2018	#4
princejim Camping Addict Join Date: Oct 2008 Location: Potteries Age: 73 Posts: 120 Thanks (For This Post): 0 Thanks (Total): 2 Rep Power: 13 My Mood	DaveA thanks very much for the info but already found them on Ebay ordered yesterday. Will let you know how I get on, some people say it is water getting into the socket that is the trouble so will give the socket a good clean. But I can,t believe the cost if it was a car component it would be a £10. Thanks for all the replies. __________________ If he is indeed wise he does not bid you enter the house of his wisdom, but rather leads you to the threshold of your own mind. Kahlil Gibran

24th July 2018	#6
princejim Camping Addict Join Date: Oct 2008 Location: Potteries Age: 73 Posts: 120 Thanks (For This Post): 0 Thanks (Total): 2 Rep Power: 13 My Mood	Thanks, Port, will send for a led see how easy it is to fix the old unit for future ref. __________________ If he is indeed wise he does not bid you enter the house of his wisdom, but rather leads you to the threshold of your own mind. Kahlil Gibran

4th August 2018	#7
princejim Camping Addict Join Date: Oct 2008 Location: Potteries Age: 73 Posts: 120 Thanks (For This Post): 0 Thanks (Total): 2 Rep Power: 13 My Mood	Ok sent for the leds and simple workround if anyone would like to test it PM me, must be a bailey. I have one working on my van so should be ok, but unable to test this one as not able to get on the van. __________________ If he is indeed wise he does not bid you enter the house of his wisdom, but rather leads you to the threshold of your own mind. Kahlil Gibran

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

23rd July 2018	#5
portchester1 Master Camper Join Date: Dec 2005 Location: Hampshire Posts: 305 Thanks (For This Post): 0 Thanks (Total): 46 Rep Power: 66	From another forum a "segapod" very helpfully offers us a much cheaper DIY work around using bi colour LEDs from this link. https://www.ebay.co.uk/itm/122957064999 Claiming "It's a very simple job for anyone with basic soldering skills so don't be discouraged."

5th August 2018	#8
portchester1 Master Camper Join Date: Dec 2005 Location: Hampshire Posts: 305 Thanks (For This Post): 0 Thanks (Total): 46 Rep Power: 66	Jim, did you find a resistor or two were already in the old lead, or any needed adding? Is it simply switch the old LED out for the new one?

8th August 2018	#9
rslsys Master Camper Join Date: Nov 2009 Location: Norfolk Posts: 282 Thanks (For This Post): 0 Thanks (Total): 18 Rep Power: 32 My Mood	Had mine replaced under warranty at 3rd service. Cheers Keith

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[NEW] Atc	Scorpio11	Eric's Caravanning General Q & A	4	6th May 2018 09:26 AM
ALKO ATC System	schnauzer	Eric's Caravanning General Q & A	8	4th May 2018 09:16 AM
Light fitting problem	Paulw	Eric's Caravanning General Q & A	5	1st November 2017 08:13 AM